Software, Firmware

autonomic or networked operation,
RACS software pack under Windows 95/98/2K/NT/XP, free for systems up to 8 doors,
transactional method of configuration sending,
firmware upgrade operation,
remote programming from PC (UT-2 communication interface required)

Hardware, Inputs/Outputs

real time clock,
four multipurpose NO/NC inputs,
customer defined input line types,
two multipurpose, electronically protected 1A transistor outputs,
two relay output (form C contacts, 1.5A rated),
inputs and outputs controlled by time schedules,
Supply
Built-in 1.5A impulse buffered power supply,
control of battery charging current,
protection from deep battery discharge,

Certificates, Standards

comply with EN 50133-4,
CE mark.

RFID/PIN Reader
Capable to operate as a slave reader or standalone controller*

* Standalone controller operation requires remote XM-2 I/O module

The RACS system Roger Access Control System is dedicated for small and middle-sized access control systems, it is capable of managing up to 10 sites (access networks) connected directly to PC or via TCP/IP.
Each access network may consist from up to 32 doors controlled on both sides and distributed over a 1200m distance

Time & Attendance

Evaluating data for time and attendance purpose does not require installation of any additional devices (readers or controllers) or using other kinds of identification cards in the system.

To prepare the RACS system for T&A, it is necessary to mark controllers/terminals which will register employees' entrances or exits. Controllers can do both, access control and register events for T&A or can be assigned for one of mentioned function only. The RACS system offers several predefined types of passages (entrance, exit, business exit) and enables defining up to 150 additional types of passages as needed for the facility. For T&A purposes, we recommend using the PR302LCD controller, which enables dynamic modification of the type of the registered passage (with a keypad) or by the external push button or switch. In particular, it is needed where one controller registers multiple types of passages.

The system RACS alone does not perform the T&A function, nevertheless, it may deliver input data for specialized T&A (Time & Attendance or PAYROLL) software modules. The wide capabilities of defining the format of text files, to which the program may export events, allow the system to be supported by numerous T&A packages available in the market.

PR Master 4.0 is a program to supervise access control system based on control panels CPR-32 and CPR controllers delivered by Roger Company.
The application is adapted to work in operating systems: Microsoft Windows 98, Windows NT, Windows 2000 and Windows XP.
•The software package can also function in Windows 95, however update of this system is neccesary. Detailed update procedure description is on www.roger.pl site.
•The most stable work of RACS software can be achieved with systems Microsoft Windows XPand 2000.

Main features of PR Master 4.0:
•operate with access control system database,
•configurable database backup files,
•configuration export/import to/from external XML file,
•automatic or interactive system events reading,
•events registry review and reports generation,
•events export to text files and payroll software,
•user time and attendance in defined system areas,
•interactive commands to controllers,
•real-time online events display,
•events monitoring on local and remote computers,
•event notifications to email accounts,
•online events reports to TXT files,
•operator selectable filtering of events,
•event notifications to email accounts,
•visualization of system work on graphic background (object map).